The Drozd Push and Pull wire stock is excellent for people looking to have a light weight and compact BB pistol. Let alone does this wire stock also collapse it also swings over the top of the gun, with out hindering your iron sights to make your Drozd like a machine pistol!
The wire stock uses the same push button mechanism to lock, BOTH as an over folder AND push-pull. This same locking mechanism allows 4 positions of stock length adjustment. Each position is positively locked with NO play! To our knowledge, no other stock of any kind on the market can claim all these features.
The best thing about this stock is the easy two minute installation that only requires a screw driver and because of its design it feels like it has been welded to your Drozd leavening it easy to remove with out any damage to your gun.
Folds over the gun
CNC Machined Parts
Easy Installation Only Requiring a Screwdriver
Does Not Damage Gun
How to install your AR15 stock
Tools you will need:
Flat Head Screw Driver
Phillips Head Screw Driver
Remove your piece stock on the original Drozd or the stock on the blackbird. This requires no tools.
Take your Wire style stock and remove the small Phillips screw and unscrew the attachment, leaving the locking ring on the stock.
Remove the two flat head screws completely. Be careful to not loose any of the metal spacers and rubber ‘O’ rings.
Insert a metal spacer with threads, followed by an ‘O’ ring and then another metal spacer with out threads into each hole in the rear of the Drozd.
Take the attachment piece, lining up the flat head screws for each hole in the rear of the gun as well as the threads for the small Phillips screw on the bottom and screw together hand tight. Do not over tighten!
Your good to go!
- ManufacturerJimC Innovations
- Accessories TypeDrozd & Blackbird Accessories
- Warranty1 Year Limited