UTG AR15 6-Position Stock, Black

Great lil attachment as long as have the adapter. This is airsoft not mil spec but works just fine no matter what your putting it on airgun wise it ain't gonna need be mil spec unless ya just have extra money to burn.

Since there are no reviews here for this item, I will start one addressing some concerns others will have. I first contacted Airgun Depot regarding the screw and washer rattling around inside buffer tube. At first I thought it was a defect, but looking at the picture, the screw and washer actually comes with the stock. I figure that this screw and washer is necessary for some airguns but not the Benjamin Marauder Pistol (P-rod). Either way, you still need to remove the rear buffer tube cap to tighten it to your gun or remove it. To remove the Screw and Washer from the buffer tube, remove the plastic stock first. Pull the lever the opposite way to lift the spring pin up, and use your fingers to pull it a little more to remove plastic stock from the buffer tube. Once the buffer tube is exposed, look towards the rear and remove the allen screw (metric) that holds the rear buffer tube cap. With the read buffer tube cap removed, shake the screw and washer out then put everything back. It will be easier to slide the plastic stock back to the buffer tube by simply pressing the release lever. The stock quality is decent. Looks and functions like most AR15 stocks. Im not sure about the removable rear buffer tube cap being the norm but comes in handy. I recommend fitting it with a Command Arms (CAA) rear saddle to get a better cheek rest and feel with your airguns, Benjamin P-rod in my case.