The Air Venturi Nomad Nano Portable Compressor gives you a smaller and lighter option that is reasonably priced with fill speeds that are similar to what is possible with the RovAir. You get the same reliable compressor you're used to from Air Venturi in a more portable package for one of the most convenient compressors ever.
You'll appreciate that this compressor weighs about 4 pounds less than the RovAir while giving you almost the same fill speeds you're used to. You'll also enjoy that it's only 9 inches high, 5.25 inches wide, and 12 inches long (without the filter), so it's easier than ever to pick up and take wherever you go.
The Air Venturi Nomad Nano gives you an adjustable auto shutoff that means you can simply set the fill pressure where you want it and the compressor will stop filling when it gets to the pressure you set. Combined with the maximum fill pressure of up to 4500 psi, this makes it perfect for today's powerful high pressure airguns.
This compressor can be used almost anywhere you go, because it works off of a standard 12V car battery as well as from a normal 110V or 220V outlet, and it includes both a power cord for an outlet and cables with clamps for a car battery. Plus, this compressor doesn't need routine maintenance like other compressors do, which means no more worrying about adding oil every couple of fills.
If you want a compressor that's lighter and more compact than previous compressors with high performance and a focus on value, get the Air Venturi Nomad Nano Portable Compressor now at Airgun Depot.
Air Venturi Nomad Nano Portable Compressor, 4500 PSI Features:
- Patent Pending Design
- Pressures up to 4500 PSI
- Adjustable auto shutoff
- Does not need routine maintenance
- Capable of running off of a 110V or 220V outlet or 12V car battery
- Power supply for electrical outlet use is built into the unit
- Convenient top carrying handle
- Fan cooling system
- Dimensions (w/o filter): 12"L x 5.25"W x 9"H (feet to handle)
- Weight: 15 lbs.
Please Note: The Air Venturi Nomad Nano is recommended for filling PCP airguns only and is not for breathing air.
Approximate fill times:
- Air Venturi Avenger (180cc) 0-4350 PSI - approx. 7:30 min
- FX Impact M4 (480cc): 0-3625 PSI - approx. 14:30 min
- Air Venturi Avenge-X (400cc) 0-4350 PSI - approx. 14:30 min
- ManufacturerAir Venturi
- Condition New
- Accessories Type PCP Fill Sources
- Warranty 1-year limited warranty
- Weight 15.00
My primary use is to fill PCP guns directly with no intentions to try filling a tank with this. Im mostly shooting I'm my basement and back yard so this will be used to fill under typically cool conditions. I read that this pump has auto overheating shut-off protection and could be limited in hot sunny conditions with repeated fills without adequate cool down periods. This is my first PCP compressor. I used a hand pump for the Marauder but found myself making life choices about shooting more. Then I ordered a Diana Skyhawk Gen 2 (soon to be here) which is a 265cc / 3,625 PSI (250 bar) unit. I was going to order a water cooled gx cs4 or gx cs4-i which are overkill for my use and how often I shoot or, better yet, don't shoot. Perhaps this compressor will be the door opening to more shooting, more guns, then tanks, then.......
Pros
This was just delivered and tested within minutes after opening. First, I used the hose plug to time pressurizing the hose to 4500 PSI (~300 Bar). Following the 110V instructions, I plugged it into an appliance extension cord (20 amp rated / 6ft in length) on a dedicated 110V 20A circuit. There are no amp specs for AC 110 or 220V listed in the instructions. I just wanted to note how I ran this for emulation. Most home outlets found in bedrooms and living rooms are 110 V- 15A and I'm guessing it could work there. All my shop outlets are 20A. The hose fill test to 4500 PSI took 39.65 seconds. Next, I filled my Benjamin Marauder Gen 2 .25 (215cc tank) from 2000 PSI to 3000 PSI. This took 1 minute 35 seconds. The auto shut-off worked as it should. The Nomand Nano pressure gauge showed about 2800 to 2900 PSI where the Marauder showed 3000 PSI. So once the Marauder was at 3000 PSI, I backed the set pressure down and the pump shut off. The pump is quiet and did not get warm at all
Cons
Too early to tell. First day and first fill. I will revisit here after a few months of successful fills or before then if the unmentionable happens.
While the pump was cool to the touch after my brief testing, I will be curious to see how it handles repeated fillings between shoot sessions - I will keep an eye on this and report back
Question?
Login to ask someone who bought this product.Saludos consulta este compresor funciona para un Kral puncher mega?
asked Armando from USAYes.
Adam from USAcan this fill a 100 cu in tank?
asked Nghia from USAIt is not recommended as a 100 cubic inch tank is 1.6L.
Adam from USAWhat is the required current capability at 12V, and the stored charge capacity (Amp-hours)? I'm considering to make a "small" cart air charger for "field" use where power may not be easily available. Think competitions or range trips.
asked Mark from USACan this compressor fill mostly any of these PCP guns? Just bought a whole set up with this compressor.
asked Kyle from USAI would like to say yes it will, as long as you have the right female fitting to fit your gun.
Lb. from USACan you fill air tanks with this compressor. Also how long is the run time before you must shut it off and let it cool down?
asked Robert from USAThis is recommended for filling guns only.
Adam from USA
Pros
I like the size,weight and portability. Works great on my Gamo with PSI setting and auto shut off, filled in less than 2 minutes.