Customer Service & Help 1-866-477-4867
Free Shipping Available

1in High Profile Rings for 11mm (3/8") Dovetail One Piece Mounts by Accushot

Item #: PY-A-636
1in High Profile Rings for 11mm (3/8
In Stock
Only $14.95
MSRP $19.99| Save $5.04 (25%)
Qty:

New and improved version of LERGPM2PA-25H4. 1" diameter, 21mm width, fits scope with objective up to 56mm. Mounts to all 3/8" dovetail rails. Integral base provides added security and stability, reducing recoil and increasing performance. Now fits full size scopes as well as compact scopes!

MSRP $19.99
Our Price $14.95 Save $5.04 (25%)
manufacturerLeapers
caliber 
optics 
product conditionNew
warranty30 Day Limited
1in High Profile Rings for 11mm (3/8") Dovetail One Piece Mounts by Accushot
$14.95
5 Stars based on 20 Review(s)
Russell
Clark Fork, ID
4 Stars
I would recommend this item to a friend.

Great mount for the money
October 15, 2014
What can I say? I mounted it on a PCP so recoil isn't an issue. It didn't mark the scope when I tightened it down and has held it firmly in place. My only complaint is that the screws are metric and every other screw on my rifle is SAE. Not a huge deal, just means I have to have two more hex keys with me.
Pros:
Doesn't mar the scope, Seems to be very strong.
Cons:
Metric screws mean more hex keys to keep track of.

Mike
Michigan
5 Stars
I would recommend this item to a friend.

Excellent deal
August 25, 2014
Not sure if this rail/ring combo was made with my Crosman TR77NPS in mind or not,but sure seems like it. Under the rear ring is a set screw that recedes into a hole in the top of the barrell which lines up the rail perfectly before tightening down the dovetail screwsVery solid and quality product,beats any dual mounting ring set. You cannot beat the price,customer service is top notch,friendly,very helpful and quick delivery. Air gun depot is a pleasure to deal with,keep up the good work Mike in Michigan
Pros:
Solid quality,you could mount this thing blindfolded

J. K.
Jourdanton, Texas
5 Stars
I would recommend this item to a friend.

Rock Solid
May 16, 2014
Purchased Gamo Big Cat .177. Rifle came with two piece mounts and scope. Did not realize how severe the recoil is on optics and mounts. After frustration and wasted pellets, purchased Accushot one piece mount and BSA Sweet 17 scope. Scope ring mounts are heavier duty and one piece mount grips rail with no movement after 200 shots. Great rock solid product!
Pros:
Four screws per scope ring keep scope from creeping and price.
Cons:
NONE

Harry
Altamonte Springs, FL
5 Stars
I would recommend this item to a friend.

Excellent upgrade on any air rifle
April 26, 2014
This is my preferred method to install a scope; an upgrade to any air rifle. Highly recommended by the critics as an upgrade to any stock air rifle.
Pros:
Easy to follow instructions.
Cons:
None

Bobby
Victoria, Tx
2 Stars

Worthless on Gammo Bone Collector bull whisper
April 10, 2014
Looks good. Would not hold on my gammo rifle even with stop pin. The pin just bent and tearing up the top of my gun. Now I'm trying BKL -260h-mb 4" long unitized dovetail mount High w/hawke 3-9x50. Only made 10 shots so far and hasn't moved already sighted in. Just waiting on wind to die to finish sighting in.
Pros:
Looks good.
Cons:
Won't hold scope on Gammo Bone Collector bull whisper. Pin bends tears up top of chamber.

Christopher
,south
5 Stars
I would recommend this item to a friend.

Keeps my Nikon223 rimfire scope stable on my Hammerli
December 6, 2013
keeps it steady

Bill
Goshen, AL
5 Stars
I would recommend this item to a friend.

Worked Great
November 16, 2013
I had a B3 chinese airgun that would not hold a scope. This bolted on tight and I haven't had the scope slip since.

Seosamh
Central New York, USA
5 Stars
I would recommend this item to a friend.

Solid and Secure
March 14, 2013
I purchased these high rings for a new BSA 3-9x40AO optic on a Hatsan 1000s .22 Striker. The optic that came with the Hatsan was utter crap as were the rings. I replaced the rings that came with the original optic with 1" medium profile "premium" rings for 11mm (3/8") dovetail one piece mounts by CenterPoint. Even though I had the CenterPoint rings tightened down extremely well, there was still slippage. The BSA needed a high profile mount, so I ordered the Accushot. Upon receipt, I noticed that the hex screws securing the base to the dovetail were larger than the medium profile CenterPoint and the soft tape lining the inside of the lower rings base was securely in place, unlike the CenterPoint. I was able to torque these screws much tighter (blue Loctite is a must). The BSA fit like a glove. I was unable, however, to line up the retaining pin in the hole in the receiver - seems that it should be about an 1/8" off center to the right side of the mount in order to match up. Nonetheless, after about 100 rounds so far, no movement whatsoever. The BSA is light years better than the optic that came with the Hatsan and this mount ensures that the optic is reaching its full potential. Accushot is good to go!
Pros:
More substantial hardware than comparable rings. Extra fasteners included, as well as the appropriate hex keys. The soft tape lining the inside of the rings is excellent. Rugged and secure.
Cons:
The vertical retaining pin did not line up with the hole in the receiver of my Hatsan - it needs to be offset to the right in order to line up after tightening the base to the receiver.

Ian
Haddonfield, NJ
5 Stars
I would recommend this item to a friend.

Great product, finally found one that works!
January 22, 2013
I had tried 2 or 3 two-piece mounts to hold my BSA Sweet 17 3-9x40AO scope, but none of them could hold that bad boy in one place for more than 20 or 30 rounds. Finally got this mount and it does a great job - nothing moved after a few hundred rounds. Appears to be well made, fit and finish look good. Overall, a good buy.
Pros:
Sturdy, works as advertised
Cons:
nothing

Ed
Greensboro, NC
5 Stars
I would recommend this item to a friend.

1" High Profile Rings
December 9, 2012
Very good value. Easy to install and all tools necessary are included.
Pros:
Ease.
Cons:
Tools included.

Steve
VA
5 Stars
I would recommend this item to a friend.

Solid Investment: One piece scope mount by Accushot
November 20, 2012
This mount allowed me to salvage my Centerpoint scope on my Crosman Storm XT - the stock rings that came with the scope were two-piece mounts and the scope seemed to wander inconsistently. Shot groupings have tightened up and remain consistent now. Similar one-piece mounts by other vendors are double or triple the cost.
Pros:
Ease of installation Solid base with dual screw scope ring anchors fore and aft
Cons:
Base has three vice four screws to anchor to rifle.

Weldon Keating
San Diego, CA
5 Stars
I would recommend this item to a friend.

High Profile Scope Mount Rings
October 9, 2012
My Gamo Silent Cat has the big bulbous sound suppressor on the end of the barrel. Plus the iron sights and the scope mount provided is not high enough to clear them. So in the bottom half of the scope there is a ghost image of the suppressor/sights. This mount is higher and clears the suppressor/sights from the scope so the scope is clear. Also the young man that I talked to at A/D, I told him about my problem and knew exactly what I was talking about. He provided a solution which worked! (when was the last time someone you talked to at a company really know about their products ???). I had gone to a local gun shop that sells airgun stuff and all I got was "This might work" for $50-$75 scope mounts intended for firearms.
Pros:
Very well made and well priced. I like the three screw arrangement to attache the mount to the receiver and the attached pin (to receiver). This makes for a sturdy mounting. It is obvious this is an airgun scope mount.

Tom
Haskell, Arkansas
5 Stars
I would recommend this item to a friend.

One-Piece Mount
July 9, 2012
Works great. Very strong mount that is well made and worth the money.
Pros:
Quality of construction. Ease of use.

Dennis
Stockton, NY
5 Stars
I would recommend this item to a friend.

Great item
June 24, 2012
Easy to install...quality item. Solid. Fired about 200 shots so far and it has remained tight. Extra screws are a plus.
Pros:
Construction Price Ease of installation
Cons:
Nothing

tomas
puerto rico
5 Stars
I would recommend this item to a friend.

strong mounts
May 17, 2012
ACCUSHOT makes very good mounts and the 1inch high rings for 11mm(3/8") dovetails are rock solid and will hold steady on any magnum air rifle specially on those spring mags.they come with a slide screw and a slide screw lock that keeps the slide screw from moving during the recoil.This means that your scope will stay in place no matter how many times you fire your weapon.ZERO Scope creep.
Pros:
STORNG HOLD,3 SCREWS ON BOTTOM, 4 SCREWS ON EACH OF THE TWO SCOPE RINGS,SCREW STOP AND LOCK.
Cons:
NO DISLIKES ON THIS ITEM

JAMES
LONG BEACH WA.
5 Stars
I would recommend this item to a friend.

HIGH PROFILE RINGS
February 17, 2012
THESE WORKED OUT JUST FINE COUD NOT ASK FOR ANYTHING BETTER
Pros:
EASY TO INSTALL

Dave
5 Stars

High Profile rings
August 18, 2011
Installed perfectly. No issues at all. I am using a Burris Fullfield E1 (Hey, I had it laying around) and the rings worked just like they should.

Reno "Bulldog"
5 Stars

Accushot High Profile Rings
June 7, 2010
Received my order today. I was impressed on the packaging and quality of the product. The scope rings came with 3 different extra allen screws & wrenches. The scope rings are light and strong. They were used on my Crosman G1 Extreme with a Centerpoint 4x16x40mm Adventure Scope. Thanks for the good products and service, Reno.

Harry
5 Stars

Accushot High Profile Full Length Integral Mount For 1" Tube
May 9, 2008
This is a great sturdy mount. I used it on a 1,100 fps spring air rifle and it has held up with the severe recoils. Other 2 piece mounts have failed and I was forced to switch to this one piece mount. I recommend it for any strong springer rifle. I mounted a 3-12x 40mm scope with the high mount.

MJS
5 Stars

Great Mount
October 18, 2007
This went on real easy and has remaind tight for over 200 shots...



By gabe from foley, AL on February 25, 2012
Looking at the picture, it looks like it has a screw down "stop" pin. But sometimes pictures are deceiving. Does it have the pin?
By James Coleman from central Kentucky on March 1, 2012

Answer:
Yes, it has a stop pin already mounted. There is also a spare one in the package.
By Craig from Mableton, GA on March 1, 2012

Answer:
Yes it is included
By Hector Escobedo from Fairfield, CA on March 1, 2012

Answer:
Yes it does. I didnt end up using that pin so I had to look at the leftover parts to see what you were asking about.

By steeve from trinidad on January 9, 2012
would this fit and sight a leapers 4x16x52 leapers scope
By Conor from Sunnyside, WA on February 1, 2012

Answer:
Yes, providing the gun you put it on has a 11mm dovetail.

By lawrence from chicago illinois on March 6, 2012
dose this work on pumpmaster 760?
By Staff on March 7, 2012

Answer:
Correct rail type but I would recommend getting a two piece mount.

Related Items

1in High Profile Rings for 11m (3/8
MSRP $15.99/Only $10.99
(13)
Warning! You must be 18 years of age or older to order and conform to all laws governing the use and ownership of airguns in your local area.
All airsoft guns have 1/4 inch of the barrel permanently colored in blaze orange. More info
©2014 Airgun Depot. All rights reserved.
Free Shipping

Get free shipping on all orders over $179! When your order qualifies, choose Ground Shipping during checkout. Available to customers who ship their orders in the lower 48 states.

more info
Same Day Shipping

Order by 12pm MST (2pm EST). Items in stock at our Utah warehouse will ship the same day. Some restrictions apply.

more info
Free Pellet Tin

Add any 8 tins to the cart & 2 will be free. Mix & match or order all the same, either way you get the two lowest priced tins for free.
Pellet Promo - Buy 8 & Get 2 Free