Precision Machined From Aircraft-grade Aluminum Alloy with Anodized Black Matte Finish. Complete with Stop-pin for Rock Solid Application. Ring Base Designed with Locking Hex Screws to Tightly Fit on Mounts with Airgun/.22 Dovetail Dimensions. Reversible Locking Plate to Fit Full Range of Airgun/.22 Rails.
excellent production. Milled to perfection no rough sharp edges. The screw clamps grab tightly and hold consistently shot after shot.
ProsThese things come with a stop pin if you so need it for your magnums.
ConsI'll let you know when I find one.
Best UsesThis is a good option when you discover that your low profile rings won't allow the magazine to clear. It is also a wonderful item when you discover that the barrel sight is in your field of view.
They Get the job done
November 9, 2018
What can I say. They hold the scope Street
Sierra Vista, AZ
EXCELLENT VALUE RINGS
November 1, 2018
WOW! For the money these are very nice rings. I see why they have so many good reviews. I like them so much that I'm going to buy two more sets now in 30mm for when I upgrade my scopes to 30mm. Probably within a year.
These rings are easily worth twice the money. WHAT A VALUE! I hope the manufacture never changes anything about them.
ConsNone that I can see.
NEW PORT RICHEY,FL
Adds a little vertical room
June 21, 2018
I use it to get some vertical leeway when I mounted the scope
Best UsesTo give one some extra maneuvering to have room to for vert.
Locks tight to the Rail
January 1, 2018
October 13, 2017
Very beefy mounts with nice hardware and finish. Began the mounting process and so far I am very impressed with the machining tolerances for such a low dollar buy in. Not perfect but darn close and only thousands will need to be shaved off.
ConsZero but will update after a few hundred rounds
June 1, 2017
Bay Shore, NY
Accushot High 1" Rings Dovetail
May 13, 2017
These rings worked great and fit perfectly. Very secure on my Condor SS.
ProsEasy to use. Very secure fit.
By Jesse P.
Perfect with my Hawke
May 9, 2017
Holds my Hawke Vantage IR 4-16x50 AO in place even with break barrel kick.
April 4, 2017
this is my third set and very inexpensive and works.
Cary, North Carolina
Own two sets love both!
March 24, 2017
These are almost a requirement for mounting a scope with an objective lens of greater than 40mm on most guns. I have a set on a Hatsan AT44QE with a Hawke 3x9 -50mm and on my Discovery with a CP 4x16 - 40mm scopes, They keep the scope on the gun very well i like the use of 2 Allen screws to attach to the gun and 4 (2 on each side) to hold the scope in place, also comes with the possibility to use a lock down pin for a springer but I haven't tested that. All in all great dovetail rings, best i have used thus far.
ProsMultiple Allen screws to attach and hold scope
nice price point for the quality
easy to install and keeps scope in place
February 3, 2017
Good secure rings for the money
August 2, 2016
Very solid mounts. I've dropped my rifle several times and never lost zero!
ProsCheap, and solid
June 23, 2015
Easy to install. Stable.
ConsThe stop pin was too long for the hole in my gun. I initially tried to use it without the pin and the scope shifted, so I had to shorten the pin with a saw (works fine now).
January 14, 2015
I used these on my Titan Nitro with the Center Point scope that came with the rifle. If you have a fat head like mine, you'll find a little higher sight profile fits best.
ProsSolidly constructed, excellent fit, and a STEAL for the price
Colorado Springs, CO
September 2, 2014
Good quality and excellent price. This worked well on my .22 Marauder with Hawke 3x9 40 scope.
Las Vegas NV
Quality Product Great Price
August 26, 2014
I used these to mount a 3x9 40 scope on a Benjamin Nitro Piston .177. They are solid. Excellent quality, great price.
ProsSolid product. Very good quality
By Sergio V.
Excellent Quality. And Product
March 24, 2014
I used them to install 40mm scopes on different Crosman Pellet 4.5 Rifles and they are exactly what I needed, they fit the 11mm rail perfectly.
ConsShipping little expensive and a little slow.
November 16, 2013
Need the 1" tube and the 3/8 dovetail and needed to get over the rear iron sight with the 50mm scope. these did the job
West Burlington, IA
1 in. High Profile Rings for 11m (3/8") Dovetail Two Piece Mounts by Accushot
May 30, 2013
These rings and mounts are a perfect fit. They are very well built and provide the correct height for my 3x9x40 scope. They provide a positive cheek weld for my Benjamin Titan NP air gun.
ConsThe product provides the correct height for a proper sight alignment allowing for a positive cheek weld.
1in High Profile Rings for 11m (3/8") Dovetail Two Piece Mounts by Accushot
March 30, 2013
Great mount with a stopping pin.
May 7, 2012
These work very well for air and 22 rim fire rifles. The screw are made of a harder grade of metal than other rings in this price range so no danger of round. The rear ring has the center pin to stop slippage even in high power spring air rifles.
January 30, 2011
These are great scope mounts if you have a scope with a big objective lens. awesome solid construction with everything included to mount them
By James D.
Great Scope Mounts
September 21, 2010
Perfect fit, solid, reasonable price. What can I say? These are great
By Darrell B.
August 23, 2010
I recently purchased a set of rings at the local gun store for $29.95 and then I found these for $9.95. The ones bought at the gunstore only had one screw at all mounting points. Triple the price for half the mount. They went back and I ordered these. The Accushot rings are VERY good quality at a VERY good price. These rings are rock solid on my air rifle. Airgun Depot has great products at a great price.
By Reno ".
Accushot High Profile Rings
June 7, 2010
I received my order today and was impressed with the packaging and product. This rigns are prefect for my Crosman G1 Extreme wth Centerpoint 4x16x40mm Adventure Scope. Along with the rings you get 3 different extra allen screws & wrenches. Thanks for the good service and quality products, Reno.
dovetail twopiece mounts by accushot
May 15, 2010
These are very sturdy and will fit most guns.
By Mark K.
November 1, 2009
I bought a set of these rings for use on rimfire rifles after years of disapointment of the subpar rings found at the marts or paying the big bucks for the high enders. It was a shocking pleasant surprise when they arrived. These things are built like a tank, hold their zero well and have excellent fit and finish. They do fit both 3/8 and 11mm dovetails well. The set screw on the bottom is a good feature that alot of other rings do not have. There is also a thin liner inside the rings that protects the scope tube from marring. At a later time I ordered 3 more sets to replace some higher end rings. I am now in the process of ordering more rings at the time of this writing. These are very high quality rings at a very reasonable price.