Air Venturi EC-3000 EVO Compressor, 4500 PSI

The Hill EC3000 EVO is a next-generation PCP airgun compressor that'll help your air gunner dreams come true. Offering pressures from 755 PSI (50 bar) to 4,500 PSI (310 bar), with automatic shutoff, it’s more than capable of filling any PCP airgun in your collection. This high-performance air compressor is designed and built in the UK from the ground up. In fact, each component including the PCB is made in the United Kingdom. This ensures each airgun compressor meets the highest possible standards.

You’ll appreciate the fact that it comes with an accurate digital pressure sensor and analog gauge because it prevents the need for recalibration during major services. Raising the bar (pun intended) even more, they’ve included the ability to display a digital readout in your favorite unit of pressure including BAR, PSI, or MPa.

Hill made several enhancements to the EC3000 EVO to give it a boost in efficiency over other airgun compressors. One example is the automatic pressure purge system that purges air whenever there is a pause, if it’s done filling, or if the compressor enters a cooling cycle. This helps ease the strain on the motor when it kicks back on against higher pressures. As a side benefit, the purge also forces any moisture out of the system. After all, the last thing you want in your PCP air rifle is water.

This compressor is an excellent investment if you want to fill your own airguns. It’s sure to last many years and because it’s built by a company that takes engineering seriously, you know you’re buying quality. If you’re in the market for a new, accurate, and reliable PCP air compressor then look no further than the Hill EC3000 EVO. Buy one now from Airgun Depot.

Air Venturi EC-3000 EVO Compressor, 4500 PSI

• Max Output Pressure: 4,500 PSI (310 BAR)
• Adjustable Output Pressure
• Automatic Shut-Off
• Automatic Air Pressure Purge
• Runs off of 110V outlet
• Air cooled
• Automated cool down cycle during fills - compressor stops itself and restarts once cooled 
• Digital Display
• Output hose with female quick disconnect fitting
• Adjustable Unit Display (BAR, PSI, MPa)
• Displays fill pressure and temperature (in Celcius) during the fill
• Integrated output filter with bleed valve
• Ultra quiet 75dB operation
• Length: 465mm (18.3")
• Height:  385mm (15.16")
• Width: 235mm (9.25")
• Weight: approx. 55 lbs
• Made in England

Please Note: The EC-3000 is recommended for filling PCP guns only. Do not use for breathing air.

Hill Crank Case Oil is in the perfect size bottle for the unit as it takes almost the whole 50ml bottle to fill the crank properly on the initial fill, and should not need topping up for some time.

The Silicone Oil is used all the time by the pump and should need replacing after approximately 50 hours of run time.

• ManufacturerAir Venturi
• Condition New
• Accessories Type PCP Fill Sources
• Warranty 1-year limited warranty
• Weight 55.00