Have you ever seen another hand pump that can pressurize a gun up to 4-500 psi? This one can! The guns that usually require a carbon fiber tank to pressurize them can now be filled with a hand pump. One pump for ALL your PCP guns. How convenient is that?!
Air Venturi G6 Hand Pump Features
- Pumps to 4500 psi/310 bar (always use the correct pressure rating for your gun)
- 20" flexible micro-bore hose (inside a spiral steel cage)
- Quick-disconnect hose with female coupling
- Moisture filters
- Integral manometer (air pressure gauge)
- Test plug so you can check for leaks
- Comfortable- ergonomic handles
- Easily accessible bleed valve
- Folding footplate
- Can be rebuilt 5x by user
- 24.80" long closed- 43.31 inches long extended
- Includes accessory pack with spanner wrench and various items for repair and maintenance
- Two-year warranty
- ManufacturerAir Venturi
- Accessories TypePrecharged Gun Accessories
- Warranty2-year limited warranty
I pump up a 13 ci /3000 psi Hpa tank to 2000 psi to test every thing, worked perfectly, with little effort etc, (first time hand pumping).
Shot this tank down testing a new repeater mod.
I filled the tank again, to 2000 psi, and after draining the hose, detached the the chuck and several small ball bearings fell out of the chuck.
I contacted AGD via email and explained what had occurred with the chuck, (on the weekend), and promptly received a reply back within several minutes.
On Monday, I received a second email, which stated that a replacement part (chuck) was being sent to me, with no question asked.
Within several days, the chuck arrived and I attached it to the hand pump hose, then filled the Hpa tank back to 3000 psi,
pump worked very well, with only moderate effort at this higher psi.
I am very pleased with this hand pump, the replacement chuck problem was handled extremely fast and efficient by Air Gun Deport,
which was greatly appreciated.
I will continue to buy from AGD with all my future needs.
Now, about the pump. The AV G6 hand pump is easy to use, comes with spare parts, and is capable of PSI outputs reaching 4000! Also, the reason I opted for this pump as opposed to the Benji hand pump, is because it has a water filter to keep water out of your gun.
Quite frankly, it is the best pump on the market, for this price.
I can easily pump my Benjamin Maximus from low (yellow on the pressure gauge) all the way to 2100 PSI in about 8 Minutes. Very impressed, I highly recommend this pump.
Smooth, easy to pump....Capable of 4500 lbs....it's what they claim, but achieving 3000
lbs. pressure is no problem.
It would not pump air into the PCP reservoir.
AGD thought it was the cylinder....
Returned the rifle & bought a Hatsan BT65....
The same thing happened....checked & re-checked the seals, connections, etc....used tried with & without plumber's (Teflon), tape....there were NO leaks....but the pump would not fill the PCP cylinder....you would pump about 15-20 times, then it would become absolutely impossible to pump anymore, then release the pressure with the bleed thumb screw on the base of the pump....
So I returned both the pump and the rifle.
Then I bought the Hill pump & the Hatsan AT 44 QE long, both work flawlessly!!....what a HUGE difference...the Hill pump is great!....it's not even that difficult to pump from 100 bar to 200 bar.