Air Venturi Male Quick-Disconnect, 1/8" BSPP Female Threads

I used one of these to make my Gamo Urban fill Probe into the the quick disconnect changeable.

Had to use some tape for the threads to fit correctly on the hand pump fitting but fits the filler probe Attachment.Overall it is a great product.

I always keep a couple of these in my airgun equipment box..

Made filling my Gamo Urban so easy. Fit perfect

I bought few of these adapters as back-up. This is a must have adapter for any airgun owners. It will help you a lot in refilling every time. Make sure to tighten up with a wrench but not super tight or the Delrin seal could break. Works great with Nomad2 electric pump.

This is a good item to have a spare around. They should last forever but you can't tell when you will need another for some reason.

I have airguns that take fill probes and I just bought an Airforce Texan where it takes a foster fitting. It makes switching from fill probe to foster fitting much easier.

I hate the fact that I even need one of these when manufactures could easily just have all their fill probes have foster fittings but oh well. This was absolutely necessary for me since I find myself often running out of tank air and having to switch to my hand pump. This connector makes switching so much easier.

works on many different uses as needed

works fine was correct size

I attached this to my Hatsan fill probe so I can use my pump for more than just my Hatsan rifles.

NO NEED THE UNSCREW FILL PROBE ANY MORE QUICK DISCONNECT

Due to a recommendation from AirgunDepot I'm glad I got this, essential to help keep the air clean when filling my PCP. I keep it in a sealed plastic bag when not in use.

It works good

Well machined fitting. Seals up perfectly making sure of no leaks. Using on a Hatsan AT44. Very hard to get off so plan on it staying unless you have gorilla hands.

Using it to air up my Evanix ar6 and it is doing a good job.

It's hard to get excited about a connector but if this thing leaks you can pump all day and not air up the gun. This one won't it's got a high quality delrin seal. Just wrench tighten properly.

Very well made I like it, but hard to disconnect.

Installed easily with no leaks.

I have purchased 4 of these Quick Disconnects, makes switching to different PCP's nice and easy. A real time saver

Used for my Streamline fill probe. Works great.

Simple and easy a must have for anyone who has multiple pcp guns

I used this for a Brocock Compatto and it works perfectly. You need to snug it down to the fill probe with a couple of wrenches and without Teflon tape.

I ordered this to connect an FX fill probe to the female quick disconnect on my tank. It came not with a washer for a seal, but a short length of delrin tube, which seemed a bit harder to deal with (a previous one I had ordered had a seal as shown in the photo above.) Well, while getting ready to connect it to the fill probe, the little seal wandered off, and I ended up fabricating something more like what you see in the photo at a friend's machine shop. As for how it functions as a quick disconnect, it's perfectly fine.

Solid and priced right. Punched this item for a Brocock Compatto.

Recently I purchased a BullBoss .25. As a Newbie, I'm not up on all the different filling requirements of different types of PCP's.. I thought surely if I can fill my Marauder I could fill a BullBoss.. WRONG! I was so surprised to see that included in the Bullboss was a small box of items which included a fill Probe! And it didn't go with my current air set up.. MAJOR BUMMER.. so, New Rifle and no air! Welcome to SUCK-CITY,.. And, I didn't even know what I needed... well, If your like me and you think Air supply should be standard and use Foster Fittings then your gonna have to realize the different Manufacturers don't agree. I guess they want to sell you the little o-rings that go with the probe, cause you know those are gonna fail.. ANY WAY! YOU MUST purchase this Air Venturi Male Quick-Disconnect, 1/8" BSPP Female Threads if you want to air up your BULL BOSS... This is the right connection for the foster female ends so common on air set ups...

if you PCP doesnt fill direct to the quick connect hose this little gem is necessary

Must have to fill with pump.

As described. Only adaptor that includes the Delrin seal.

Its a fitting and I dont like the delrin seals and why not not just use npt threads.

Recently purchased the Gamo coyote and this little adapter makes it so easy to fill the gun and swap from air tank to air tank as well as a hand pump.

Works well

I bought this Air Venturi Quick-Connect adapter for my new Gamo Coyotes' quick fill probe! This is my first PCP Air Rifle and my first experience with high pressure air (HPA). I wanted to make sure I used the proper and safe equipment, rated for 4500 psi. high pressure air. The Air Venturi Quick-Connect adapter works flawlessly and the inner Delrin seal assures that there are no air leaks...Air Venturi accessories remove any guess work, when it comes to dealing with HPA! I highly recommend Air Venturi products for your PCP Airguns!

Work great with my FX wildcat Filll probe

this item did not fit in the quick connect , I called air gun depot , they replaced it . the new one worked well .

just what i need wonderful adapter for my pcp hand pump

Used with a BSA fill probe it works without leaking. Delrin seal works without having to be too tight.

This piece works well , have been using these for years without a problem.

Using this with my G6 Air Venturi pump and it works fantastic! I recommend this to those who need this product, simple to use and install.

Had it shipped fedex had some trouble with the currier. ..but work s great

Made to last the life of the gun

Its good to have. Fits foster quick disconnect.

It works good for Hatsan and Walther Rifles.

Great adapter, so easy to use.

I attached the connector to my PCP probe and it worked fine. Although it felt loose on the female quick-disconnect, there was no leakage. I checked it with soapy water. A thumbs up for this product!

Excellent piece of equipment. It is quick to hookup and it is quick to use.

This great little fitting allows the use of a Benjamin hand-pump to refill Hatsan Fill Cylinders and is much cheaper than buying another hand-pump. Just be sure to follow the instructions about using plumber's Teflon tape to get a tight seal. And as an added bonus, Hatsan cylinders are easier to refill than Benjamin. Buy it!

Not sure what you can say other than it works perfectly. Needed to attach the air stem for a Hatsan AT44-10qt for use with an Air Venturi G6 hand pump and everything works perfectly with no leaks and no difficulty engaging and disengaging the coupling.

I have bought several of these and they all work great. No issues with any of them.

I ordered this adaptor thinking I would need it to charge the Hatsan BT 65 with the Hill pump. I was wrong. No adaptor is needed to hook up Hatsan rifle to the Hill pump, just screw in the charging probe that comes with the rifle to the end of the hose and you are ready to charge your Hatsan. However, you will need this adaptor to charge the Hatan if you have the Benjamin pump, the Benjamin Carbon fiber tank, the Airforce pump, or the Air Venturi carbon fiber tank. I am keeping it for the time I buy the Air Venturi or similar carbon fiber tank.

Since I have a Cabela's Visa I used my points to purchase a Benjamin hand pump for no money out of pocket....then just screwed this adapter on it and it works flawlessly to charge the AT-44-S10 Long Barrel .25 cal I purchased through AirgunDepot. For $10 bucks it was a no brainer...works great!!

Works Great, allows me to use my Benjamin pump with my AT44. Will also allow me to use the Benjamin Scuba adapter when I get a tank

This fitting fit my probe perfect and was not sloppy on the threads and it seals good with no leaks. This fitting also secures to my tanks hose female Qd perfectly and feels very solid, snug with no leaks.

This is very good working perfectly with my hand pump for my Hatsan AT44