The Air Venturi 13 oz. aluminum high pressure air tank is the perfect pairing for many airguns and a common modding accessory. It's particularly useful for QB79 owners.
Please Note: This high-pressure tank must be filled through the male quick-disconnect on the neck. Before buying, please contact your local air supplier to see if they can fill this tank. Paintball stores may be able to fill your tank, so you may be able to find a fill source through them. Many fill sites may be able to fill your tank but may need an adaptor to do so.
AV 3000PSI 13ci Tank & valve 1100psi set
- 13 cubic inch D.O.T. and TC approved aluminum bottle
- 3,000 psi maximum pressure (206 bar)
- Regulator output pressure of 1,100 psi
- Fill via male quick disconnect fitting fixed on valve assembly
- Bonnet thread
- DOT, low pressure burst disc
- Restrictor, bleed hole and safety groove
- Mini fill valve is hardened, plated
- Shipped empty
- Weight: .5 lbs
- Black
- Includes tank only
- ManufacturerAir Venturi
- Condition New
- Accessories Type PRECHARGED GUN ACCESSORIES
- Warranty 1-year limited warranty
Question?
Login to ask someone who bought this product.Will this work with the Fusion 2?
asked Christopher from USAWill this work on the gauntlet gen1
asked Joshua from USACan this thank be usef with the MPX or MCX?
asked Marco from USAYes in fact it was made and developed specifically for the MCX and MPX I use one with the MCX that I converted to HPA. I would recommend using a remote line in conjunction with the tank and adapter so that you can use the MCX stock that comes with the gun as opposed to the one that you can get for the tank as it's uncomfortable.
Andrew from USAwhat do I need to fill the tank?
asked Bill from USAEither a compressor or a manual hand pump but I take mine to the local paintball store and they fill it up at the rate of a dollar per thousand PSI so $3
Andrew from USAWhat’s the adapter for?
asked Edward from USAThe adapter screws into the back of the gun MCX or MPX where you would screw in the 90 or 88 g CO2 cartridge
Andrew from USAis the regulator adjustable?
asked charles from USAYes and no. I've heard of people shimming their tanks but I've never done it myself and if you do that it will void your warranty and could possibly be dangerous I wouldn't recommend it just buy a bigger tank
Andrew from USAhow can i fill this tank myself?
asked John from USAWill this tank fit the umarex gauntlet
asked Joshua from USAYup
Andrew from USAYes
Mark from USAWill this fit the Sig Sauer MCX Virtus PCP?
asked Holland from USAYes but don't buy the vertice it's one of the worst PCP guns ever created
Andrew from USAYes
Mark from USAThievy tank can be used in fx impact rifle ?
asked Carlos from ChileNo. The threads are totally different. This tank's output is regulated to 1100 PSI. Way too low for use with a FX Impact.
Mark from USAWill this fit on my umarex gauntlet .177 cal?
asked Howard from USAYes
Roque from PhilippinesWill this work good with a drozd, or is the 1100psi output too high? I already have the adapter to fit, just wondering if the gun can handle that much or if I should get a tank with an 800 output....
asked ScottCould this be a direct replacement for the Umarex Gaunlet bottle? Appearance is identical and info says it’s good for the QB 79.
asked Danny from USA
Used a Air Force co2 adapter and installed it on my 177 talon with a 24 inch barrel . Getting 70 shoots at 850 fps with 9.75 grain pellets .
Pros
Light and compack.
Cons
None