The updated Air Venturi MK5 Pump by Hill gives you more pressure with less effort than the older model thanks to its totally redesigned internal valving. It may look the same, but it gets you to 4500 psi/310 bar faster and easier than before, which is key for some of the newer high pressure guns.
Hand assembled and individually tested by Hill in Great Britain, the MK5 continues the tradition of solid and reliable pumps they've become famous for. Consistent and sturdy, you'll find out why many expert shooters swear by how easy it is to field strip and maintain.
The kit includes the Dry-Pac system that lets you remove up to 90% of moisture from the air moving through the pump. It also includes a female quick disconnect fitting you can thread on the end of the hose so you don't have to buy more parts or fiddle with threading on the fill probe.
If you're looking for a best in class hand pump that gets you to higher pressures faster and with less effort, buy the Air Venturi MK5 by Hill today at Airgun depot.
Air Venturi MK5 Kit by Hill Features:
- New design takes less effort than older design
- Nickel plated finish offers enhanced wear and moisture resistance
- Up to 4500 psi/310 bar
- 3 stage pump
- Field strips in 5 minutes
- Included Dry-Pac system removes 90% of harmful moisture
- New color changing mediawith color changing moisture saturation indication
- Includes female QD fitting
- Includes 17.5" hose
- Manufactured and hand assembled in England
- Fully tested by Hill before packaging and shipping
- 5 year limited warranty
- ManufacturerAir Venturi
- Condition New
- Accessories Type PCP Fill Sources
- Warranty 5-year limited warranty
- Weight 6.80
Right now dont have anything
Pros
Very reliable. Im had it about 2 weeks. I probably got a little over 1000 pumps already. Plus the weapon Im using it for only 2 shots has been used.
Cons
I think they should make the base more stable. Drill holes so you can mount it
Pros
Works very well.
My error was I did not tighten the connections enough- I was thinking along the lines of replacing plug in oil pan on truck where it is not advisable to tighten too much.
I apologize for the previous post- could not find a way to edit it.
Y'all may remove it if you can.
Don't waste your MONEY
Pros
Never buy
Cons
Works when you first got it, but if you leave a sit for a long period of time won't work. Mine looks brand new I won't work. Got over $350 tied up in this thing with fittings and holes. And what happened to your lifetime warranty?? When I bought it lifetime now you say 5 years what a rip-off.
Pros
Works well glad to have purchased it.
Bought the kit, includes female Foster fitting and moisture filter. Ready to go out of the box.
Pros
Solid, well made pump.
Cons
Nothing
Question?
Login to ask someone who bought this product.Does this work with my Beeman 1517 ?
asked Scott from USAYes, the Hill Mark 5 Kit will come with the adapters you need for the Beeman Commander.
Adam from USADoes this pump work for a Hatsan Blitz?
asked Charlie from USAYes, you will need the male adapter for your probe if you don't already have one. https://www.airgundepot.com/air-venturi-male-quick-disconnect-3550.html?sid=322
Adam from USAWill this kit connect to a Benjamin Marauder?
asked Richard from USAAll pumps have a air "Chuck" on the end of pumps whip. That "Chuck" connects to the fill probe of YOUR device to be inserted into YOUR device. OR This pumps "Chuck" attaches to YOUR devices inlet male nipple that is universal and fits this pumps "Chuck". Like a 120psi air line off a automobile sized compressor and you put the chuck into the receiver at the end of the airhose and press onto valve stem on tire rim. This is 100-120 times higher air pressure then your car tire. So you don't hold it by hand. Your put This pumps "Chuck" onto the fill nipple or onto fill probe and it stays put.
mae from USACan it be use on a texan big bore 50 cal air rifle
asked Shermaine from USAYes. But it is going to be a lot of pumping.
Adam from USAWill this pump connect to the winchester 70-35
asked martin from USAThis uses a probe to stick INTO a hole to add air. You need the probe with The male tip to fit the universal "Chuck". OR your fill probe needs a adapter that screws onto top of probe that allows probe to be inserted into "Chuck" and the fill port of your device. All pumps have a air "Chuck" on the end of pumps whip. That "Chuck" connects to the fill probe of YOUR device to be inserted into YOUR device. OR This pumps "Chuck" attaches to YOUR devices inlet male nipple that is universal and fits this pumps "Chuck". Like a 120psi air line off a automobile sized compressor and you put the chuck into the receiver at the end of the airhose and press onto valve stem on tire rim. This is 100-120 times higher air pressure then your car tire. So you don't hold it by hand. Your put This pumps "Chuck" onto the fill nipple or onto fill probe and it stays put.
mae from USAWill I need an adapter to use this pump with the Hatsan Flash Pup QE?
asked Steven from USAAll pumps have a air "Chuck" on the end of pumps whip. That "Chuck" connects to the fill probe of YOUR device to be inserted into YOUR device. OR This pumps "Chuck" attaches to YOUR devices inlet male nipple that is universal and fits this pumps "Chuck". Like a 120psi air line off a automobile sized compressor and you put the chuck into the receiver at the end of the airhose and press onto valve stem on tire rim. This is 100-120 times higher air pressure then your car tire. So you don't hold it by hand. Your put This pumps "Chuck" onto the fill nipple or onto fill probe and it stays put. Does your device have a male nippele or a inlet port requiring a probe? Either way you MAKE this fit. All pumps have a air "Chuck" on the end of pumps whip. That "Chuck" connects to the fill probe of YOUR device to be inserted into YOUR device. OR This pumps "Chuck" attaches to YOUR devices inlet male nipple that is universal and fits this pumps "Chuck". Like a 120psi air line off a automobile sized compressor and you put the chuck into the receiver at the end of the airhose and press onto valve stem on tire rim. This is 100-120 times higher air pressure then your car tire. So you don't hold it by hand. Your put This pumps "Chuck" onto the fill nipple or onto fill probe and it stays put.
mae from USA
Well worth the money. Even if you later get a compressor, like I intend to, it will be a great back up tool.
Pros
Well made, sturdy construction. The kind I would expect from American made items. Nice job England! Works well - gives a nice workout.
Cons
Make it in the USA.