Free Shipping on orders over $179
Talk to an Airgun Specialist 1-866-477-4867

Leapers Scope Mount Base, Fits RWS Diana 34, 36, 38, 45 & 350 Magnum

Compensates for Droop & Stops Scope Shift
  • Code: PY-A-2298
Out of Stock
Top Picks
This is a dovetail to weaver mount. You will need to purchase low profile Weaver scope rings. Look professional while you stop scope shift--forever! This elevated scope base provides secure scope mounting with Weaver/Picatinny mounts and 3 hex screws attaches base to your RWS rifle. Specifications:
  • Decreases barrel droop with 20.7" Upward Compensation at 30 Yards
  • Works with Most RWS Diana Break Barrel Models (RWS/Diana 34, 36, 38, 45 & 350 Magnum)

Features:
  • Recoil Stop Shoulder and Stop Pin to Prevent Bi-directional Recoil
  • Three High Strength Screws to Ensure Solid Locking
  • Fits 9mm-11mm Airgun Dovetail with Tight Tolerance
  • 12 Picatinny Slots on Top Rail to Provide Flexible Eye Relief Adjustment
  • Milled Base to Accept Filler Screw on Rifle.

Includes: 2 Hex Wrenches, 2 Filler Screws and Elevation Mount *Fits guns with the T05 trigger. In 2011, Diana introduced the T06 trigger and it also has a longer rail. This adapter does NOT fit the guns with a longer rail.
Read More
Specs
  • Manufacturer UTG
  • Condition New
  • Accessories Type Scope Mounts
  • Warranty 1-year limited warranty
  • Weight 0.45
Read More
Reviews
Average Customer Review
5.0
5.08 Reviews
5
100% (8)
4
0% (0)
3
0% (0)
2
0% (0)
1
0% (0)
Write a Review
Sort by:Date Rating
5.0
By WallifordUSAAugust 23, 2017

The Leapers Scope Mount Base is specifically designed to solve scope mount creep and barrel droop problems found in high powered RWS rifles. I mounted the Leapers mount on my RWS 350. Zeroing the scope required minimal elevation adjustment. After several hundred shots, the mount is holding strong and reliably. The picatinny/weaver style mount is effective solution to stop scope movement is high powered spring guns.

Pros
High quality; high value for your dollar.

Cons
No cons have stuck up their ugly heads after several hundred rounds.

5.0
By paulMarch 1, 2017

very happy with the mount. went on easily and fit perfectly.

5.0
By EricUSAJanuary 14, 2015

Never been able to use a scope on my Diana Model 34, and now I can. Because of the barrel droop problem, the ccope wouldn't adjust to zero on target at any distance & now it does!

Pros
Solidly made, fights tight, and it works as its' supposed to

Cons
none

5.0
By sammyUSASeptember 28, 2014

With hacksaw cut off front lower barrel obstruction 1/8 x 1/4-inch so it will mount...mod looks great and works great...be sure to licorice, even the dovetail grooves...enjoy!

Pros
Turned a night mare guns into daily shooters...easy fix.

Cons
Be sure to use picture!

5.0
By RodgerUSAJune 27, 2014

I bought this mount for a RWS 34P air rifle. It was the wrong mount for my new rifle that has a T06 trigger. This mount works only if the rifle has an old T05 trigger with an old OE rail. I had to return this mount and order a different UTG mount #DNT06, which is mounted at the rear of the OE rail. The Leapers Scope I put on the #DNT06 mount is solid and holds zero. Shooting quarter patterns now at 21 yards. Both mounts look similar and I would expect if you have the T05 trigger, this mount would also be excellent...thus the 5 star rating.

Pros
Solid fit with rifle and scope and it looks like good quality,

Cons
none

5.0
By ThomasUSAFebruary 6, 2012

This mount keeps scope in place better than the RWS mount that came with the Diana 34 pro. This is the best mount for a heavy spring gun.

5.0
By Efrain M.July 9, 2009

Both the Leapers UTG Tactical Rail Adaptor Mount, model MNT DNTOWL and DN034, fits perfectly the 9 mm-11 mm wide dove-tail mount in the RWS Diana 34. All air rifles come with a dove-tail mount, use their particular scopes, and need this rail adaptor for the conversion to a weaver mount. After doing the mount conversion, you can install any Red Dot or high quality scope (all of them require a weaver mount). Be carefull when ordering, the model MNT DNTOWL has zero elevation compensator and model MNT DN034 has a 20.7 inches upward compensation at 150 feet. When installing on the RWS Diana 34, the hex head screws will be facing the left side of the rifle and the large screw ontop of the dove-tailmount will perfectly fit inside the rail adaptor. The benefits derived from this adaptor makes it worth every penny.

5.0
By Lyle S.June 6, 2009

This makes your scope mount solid and reliable.
Save yourself some trouble and just buy this.

View Next
Q&A

Question?

Login to ask someone who bought this product.
Login
Create Account

Will This work on a Ruger Blackhawk Elite?

asked Philip from USA

will this fit a gamo fusion whisperer?

asked Brad Henschel

It might but you should by this one instead: UTG Scope Mount Base (for RWS, Gamo Rifles & More) Item #: MNT-DNTOWL

John from USA

Will this work on a crosman 1077?

asked Garrett from

Yes it will work as long as you have enough length on your dovetail rail, Why do you have barrel droop on the crosman? works great whether or not be advised if not chose the zero elevation compensation in regard to not having barrel droop.Weaver base mounts are the way to go, good hunting.

Hector from USA

will this fit a ruger airhawk?it said to be a copy of the diana 34

asked joe

It might as both rifles are now made by Umarex, but we can not say for sure. I would recommend asking leapers by calling 734-542-1500.

Steve from USA
View Next