- Magnification: 3x-9x
- Objective Lens: 32mm (adjustable)
- Tube Diameter: 1"
- Exit Pupil: 3.6mm to 10.6mm
- Weight: 13.9 oz.
- Length: 8.11"
- Eye Relief: 3.2" to 4.2"
- MOA: 1/4: 1/4" Click Value @ 100 Yards
- Parallax Adjustment: 3Yards to Infinity
- Reticle: Mil-dot (Red/Green Illuminated)
Features:
- True Strength scope
- Emerald-coated optics (95% light transmission)
- Nitrogen-filled
- Shockproof
- Fogproof
- Rainproof
- Zero lock/reset target turrets
- Sidewheel adjustable rheostat
- Black matte finish
- Includes: (1) CR1620 lithium battery, flip-open lens caps, (2) Hex Wrenches, Medium Max Strength Lever Lock Quick-Detach Weaver/Picatinny Rings, Mil-dot Chart, 2" Sunshade, Owner's manual and cleaning cloth
- Manufacturer UTG
- Condition New
- Accessories Type Scopes
- Warranty Lifetime limited warranty
- Weight 0.91
Bought 2 of these and wish I would have spent just a little more for the Hunter scope. These are too short for the Accushot one piece mounts.
Pros
Nice scope, IR and zero lock are a plus.
Cons
Glass is not quite as clear as I expected. Should be noted that the Accushot one piece mounts wont work with the Bug Busters. Mount is too long. Dont care for the included rings, dont seem solid enough.
Pros
the scope appears to be well made and I haven't really zeroed it in yet. It mounted fairly easily. I still got to make sure it's exactly where it should be regarding loading.
Cons
This has nothing to do with scope. Your system needs tweaking. I never did get a auto reply email on the order. I had to email you complaining before I heard from one of your customer reps. Not good as far as I am concerned.
Weaver rails are 22mm and picatinny are 20mm.. the weaver mounts will fit the picatinny, but the picatinny will not fit the weaver. So far all I can find to adapt it to my Blitz is a 11mm dovetail to picatinny adapter.
Pros
Well built nice scooe
Cons
The mounts do not fit the 22mm weaver rails as advertised.. They fit the 20mm picatinny rails fine, but will not fit on the Hatsan Blitz.. also a little short to accommodate the magazine.. purchased some clip in adapters from Amazon and hopefully that will fix the issue..
Pros
Great scope mounted on my first barrel break air gun. Ruger max elite .22. For this gun 45 yards with different pellets is about the best. Pellets I have used is a wide range but at 45 yards I was most consistent with Premier Pointed 14.3 gr but I ran out and went to Premier Domed. Had to reset scope and at 45 yards had tight pattern but not as consistent.
Cons
Things I am learning. Keep the stock screws tight and replace the quick release mounts that came with the UTG scope with a ridged mount! Also different .22 loads from Premier Crossman to Benjamin you have to readjust you scope sight.
Great scope. I'll admit first off though it's pretty annoying to install, but when it comes to adjustment settings, zeroing, and accuracy, 5/5. Great deal for price.
Pros
Scope itself
Cons
Better mounts
I put this on my Diana 48 (It already ate up 2 rifle scopes ) 200 shots and so far so good . It took about 40-50 shots for the rings and scope to settle in. But as I have been finding out that is not uncommon with a springer. When you make adjustments shoot a few times don't go chasing it around. If you are a scope snob don't buy it . But if you are looking for a very good working scope buy it . One last thing , even if you have installed and shot scopes before read the instructions.
Pros
Nice scope with a lot of features. Well built.
Cons
The flip up scope covers are only useful as dust covers.
I mounted this scope on a Benjamin Regal NP .22 for rats. I love my setup and with the adjustable brightness reticle set on green, I use both eyes. It's easy to see the big picture for movement and then cross hair the rat. Plink! When zeroing in, it's best to click beyond the desired set point and dial back.
Pros
The adjustable brightness green and red rectile is helpful when shooting with both eyes open.
Does what i expected it to do. It's a nice piece for add on to any gun r crossbow
Pros
Illuminated,improves accuracy,makes your gun look fancy 😆
Cons
The medium mounts you can't use jacket hollow points with💩 I suggest high mounts especially if your trying to load quickly,one color works better in day& one in evening flopping em is not option unless your eyes work better than mine?, the battery didn't last very long so don't forget to turn it off manually cuz there's no auto shut off on it. The quick release don't workon dragon claw& threw my horton rdx storm off so f%#(k those quick release mounts
Question?
Login to ask someone who bought this product.Will this scope fit the avenger bullpup or do I need different scope mounts? Thank you Tom K
asked Tom from USAI would recommend getting high mounts.
Adam from USAWill this scope mount on my JTS Airacuda .30 cal.? If so, what parts do I need other than the scope itself?
asked John from USAWill these QD rings attach to the UTG Compensation Mount for RWS. I noticed comment about the mounts not fitting Weaver rails.
asked PAUL from USAYes.
Adam from USADo I need any particular mounts to mount this on a gamo swarm whisper 10x? Will the mounts that come with it be alright or will the pellet loader/magazine mechanism be in the way.
asked Clifton from USAThese are the rings I would use to mount this scope on a swarm rifle: https://www.airgundepot.com/accushot-py-635.html?sid=322
Adam from USAwill this scope work with the RWS Lock Down Mount? The ring distance needs to be over 3.5". thanks
asked DAVID from USAHow tall are the mounts ?
asked Scrambler82 from USAWill this fit on a Gamo Whisper?
asked Neil from USAWill this fit and work well on my gamo whisper fusion mach 1? Thank You
asked Chris from USAyes. The rings that come with the scope will not fit. The scope will fit the rings that come with the gun.
Mark from USAwill this fit on a Benjamin Marauder PCP air pistol and if so what is the correct riser height needed?
asked Craig from USAYes it will fit. You will need 11 mm dovetail base 1" high rings to clear the magazine.
Mark from USAHow well does it hold up on a Hatsan 135 30 cal
asked Lionel from USAIt should hold up. The scope is fully airgun rated and warrantied.
Mark from USAI am trying to mount this scope and QD rings on my Hatsan AT-P2 and cannot get the QD to function. The "lever" appears to be to tight and will not allow me to flip the lever to secure to the rail. Any thoughts?
asked Marty from USAThe levers are threaded on the locking bolt. You can loosen or tighten the lever like a nut.
Mark from USAWill this work on my Gamo swarm maxxim 177 caliber? What I need to buy some additional mounts or where D Mount that it came with work?
asked Marc from USAI have the same Gamo and called customer support and you will need the high rings. They are accuteshot 1 inch rings high version. Will fit 11mm dovetail
James from USAWill this scope mount to the gamo big cat 1250 without any additional hardware?
asked ChrisHas anyone mounted this on the Benjamin Marauder? Was there any issues with the magazine?
asked GaryI bought this scope as a replacement for the stock scope that is sold with the Gamo Swarm Maxxim air rifle, for $180 as the current package price for the .22 caliber option. In attempting to install the Bug Buster scope on the rail of the Gamo air rifle, I discovered that the scope rings provided with the Bug Buster scope do not fit the scope rail on the Gamo Swarm air rifle. Also, the one-piece scope mount on the Gamo air rifle is a tad too long to fit the Bug Buster scope. I sure would be grateful for any pointers that can be offered to help me zero in on the right scope rings required for affixing the Bug Buster scope to the Gamo Swarm Maxxim air rifle. Thanks in advance.
asked TundeWill this scope mount on 3/8" groove receiver on Crosman F4? And does the mount have a pin stop?
asked Gary BaumannWill this work on a Gamo whisper fusion Mach 1 without any other attachments other than what it comes with?
asked PaulHello, Will this UTG CQB BugBuster IR 3-9x32 AO fit the rail on my Gamo Whisper Fusion Mach 1? Just wanted to know if I had to order anything else before placing my order. Thank you for your time. Mike
asked Mike from USAWhat Offset Scope Rings would fit a Marauder Rifle .22cal to mount this Bug buster scope for proper eye relief, Height, and be able to still load magazines without any problems.
asked Gary from USAWhat mounting rings do I need to mount this Scope to my Marauder Pistol .22 cal low mount that clears magazine is preferred
asked Gary from USADoes the rings fit a 11m dovetail rail?
asked Belinda from USANo. The rings are for a Picatinny rail. You will need an adapter like this: https://www.airgundepot.com/utg-weaver-to-11mm-or-3-8-dovetail-adapter.html?sid=322
Adam from USAHow does it hold up to recoil? Has anyone used it on a heavier recoiling powder burner? I bought it for a 22, and I just won't work...I wonder if it would put up with a 12 ga slug gun..
asked Neal TresslerWill this mount on my crosman 2400kt with steel breech? Have had no luck so far finding anything that will work correctly. Thanks Vince
asked VinceWould any of the bugbusters work well on Gamo' Urban/Coyote air rifles at close range< 50'.
asked JohnI just bought the Hatsan 135 qe breakdown .30 cal. Do you think this scope will hold up and do I need seperate railling system? Thanks in advance.
asked ChristopherWill this fit on my Benjamin 392?
asked SamYou will need an intermount of some sort because the are no rails, grooves or dovetails for mounting a scope on the 392. Crosman sells the B272 mount, Baker Airguns make an intermount, and Air Venturi makes one as well. You can find the Air Venturi and the Crosman B272 on this website!
John from USAwill this fit a Winchester mp4 rifle
asked clyde from USAyes this would work nicely with your mp4 it would look awesome too.
Beverly from USACan you put these on pellet guns
asked Jake from USAyes this scope is rated for pellet guns in fact utg holds up better than most. worth the price.
Beverly from USAI've read that for air rifle use, the scope has to be specifically designed for it due to the recoil force from the opposite direction as opposed to a conventional firearm. So this scope is designed to be used on both?
asked SteveI have used mine on the AR and SKS. Several hundred rounds each and no problems.
JoeI am just someone trying to help not an expert. I have centerfire rifles and air rifles and have made the mistake of putting an expensive rifle scope on an airgun. I have not tried this in reverse.I can tell you that centerfire scope rings are made from steel and aluminum airgun rings will not hold up.This scope will focus at extremely close range I dont see the point on a centerfire rifle. This scope is made for air soft and air rifles it is a high quality scope and will last for years on an airrifle. Personally I would not put this on a deer rifle.
Beverly from USA
I have another bugbuster on my AR. Amazing accuracy. However this one has an issue getting to dead center. Still working on it with my Unarex Notos. It could be pellet grain size, air pressure on the tank, but I'm convinced it's the operator.
Pros
Easy to use. Clarity. Love the green to red options.
Cons
None.