Free Shipping on orders over $179
Talk to an Airgun Specialist 1-866-477-4867

UTG Universal Dovetail To Picatinny/Weaver Adapter

Only $22.99
  • Save $2.00 (8%)
  • In Stock
  • Code: AGD-A7311 $22.99
Add to Cart
This patent-pending UTG Universal Adaptor is exactly what you need. Turn your flat or rounded dovetail receiver into a convenient scope platform. The base is constructed of lightweight, aircraft-grade aluminum so it doesn't add weight to your gun, and is strong enough to withstand serious recoil. Having 14 slots gives you plenty of space to mount the optic of your choice and allows for exactly the eye relief you want. The UTG Universal Dovetail to Picatinny/Weaver Adaptor features a cantilever design and offers universal fit for both flat and rounded dovetail receivers. This adaptor fits 9mm - 11mm airgun/shotgun dovetail rails. The extended 5.71" picatinny top rail has 14 slots to provide flexible eye relief adjustment and mounting flexibility for the optics of your choice. Its equipped with 4 high strength screws and adjustable recoil resistant stop pins to ensure solid locking and zero holding. The adaptor offers quick and easy slide-on installation and is constructed to resist bidirectional recoil force. It is precision machined from aircraft aluminum, and has a hard coat anodized matte black finish.

UTG Universal Dovetail to Picatinny/Weaver Adaptor Features
  • New generation cantilever design rail adaptor
  • Universal fit for both flat and rounded dovetail receivers
  • Fits 9mm - 11mm airgun/shotgun dovetail rails
  • Extended 5.71" picatinny top rail with 14 slots provides flexible eye relief adjustment and mounting flexibility for various optics
  • Equipped with 4 high strength screws and adjustable recoil resistant stop pins to ensure solid locking and zero holding
  • Designed to resist bidirectional recoil force
  • Quick and easy slide-on installation
  • Precision machined from aircraft aluminum
  • Hard coat anodized matte black finish
  • Saddle height is minimal 0.59"
  • Weight: 2.4 oz.
  • Width: 0.84 in.
Read More
  • Manufacturer UTG
  • Condition New
  • Accessories Type Scope Mounts
  • Warranty 1-year limited warranty
  • Weight 0.25
Read More
Average Customer Review
4.08 Reviews
75% (6)
25% (2)
0% (0)
0% (0)
0% (0)
Write a Review
Sort by:Date Rating
By JasonUSAFebruary 20, 2019

Bought this adapter for use on the Texan ss but seems a bit odd and errhrhs.. So I moved it to different air rifle then works great for me.

Easy to use to mount anything.

None. But install it carefully if you use as scope base.

By WilliamUSAJuly 14, 2018

worked great on the Swarm to get new scope high enough over the Magazine on the bottom Gun is the adapter with new bug buster scope

Easy to use


By BudUSAFebruary 17, 2018

This is a one-piece adapter unlike other commonly-used ones that have a separate movable clamping bar. It relies on on actual bending of the aluminum extrusion to attach. I concur with other reviewer comments about the instructions being vague and unclear, but I finally realized the dual-screw arrangement. As shipped, there are two opposing screws in each set of holes, and is set up for ENLARGING the dovetail. By screwing in the long screws against the short ones the width of the dovetail opening is increased. The width as received was already too wide for my AirForce Texan, but by removing and reversing the long screws they then pull the sides of the dovetail together, REDUCING the dovetail until it eventually clamps adequately. I was about to give it zero stars until I finally figured this out, but realized it works well after I did. The Weaver/Picatinny rail is made accurately and fit the bipod I attached to it. This is a good adapter to use on a single application, but stick with two-piece adapters if you intend to move it around to different ones.

Well made, good finish, extra length on Picatinny rail makes it more versatile. Good for a single application (mount it and leave it)

Instructions could be clearer, and being a one-piece design makes it harder to move to different firearms. Constant bending and unbending that might be necessary if moved between narrower and wider dovetails will weaken the extrusion and result in eventual failure. Also having to remove the short screws to clamp the dovetail makes it less likely they'll be available if needed again to expand it to fit a wider dovetail.

By PatrickUSAAugust 21, 2017


just right really like


By DanAugust 10, 2017

This is my second dove tail rail adapter, the first I got elsewhere and didn't work and I ultimately ate the cost on. This has a great fit and finish and I am very happy with it!

By JAMESUSAAugust 3, 2017

Very nice mount well made and easy to install. would recommend this to anyone looking for a solid mount.

By RichardUSAJune 1, 2017

It fit very well and locks in place like a vice. It allows one to attach the weaver type mounts which hold the scope more securely. It is longer than most so it provides more flexibility in mounting the scope. Well made and strong

By JonUSAJuly 12, 2016

The instructions are a little vague, other that that, it's a good mount

Solid, works well

Instructions leave a bit to desire

View Next


Login to ask someone who bought this product.
Create Account

Will this adapter work on a Benjamin Marauder

asked Kevin from USA
View Next
Top Picks