The Crown features all the adjustments that have made the FX Impact such a desirable rifle, including: externally adjustable regulator, adjustable power wheel & hammer spring, adjustable transfer port, removable 480cc carbon fiber tank, dual air pressure gauges (one showing the regulator pressure, one the tank pressure), and of course interchangeable barrels so you can swap calibers. But the Crown takes barrel swapping to a whole new level with the new FX Smooth Twist X barrel system. The Smooth Twist X barrels feature the ability of changing out the actual barrel liner to easily change not only caliber, but twist rates as well on the rifle! This takes shooting to a whole new level as you can cater the barrel design and twist rate to all different types of pellet shapes and sizes. The ultimate in adjustability is found within the FX Crown.Other features of teh FX Crown include a match grade two-stage trigger, a breech block that has dovetail rails for your scope while also accepting high capacity rotary mags. These magazines are the same magazines used on the FX Impact (18rd in .177 & .22, 16rd in .25 & 14rd in .30). You’ll want to use high rings for the scope of your choosing. For even more adjustability we’d recommend FX No Limit rings (perfect for long range adjustments). The barrel is fully shrouded to dampen the sound and make the rapport immensely quiet.
Note that there is a large demand for this rifle. Preorders as always will be fulfilled in the order they are received. Expect delays initially on the launch of this rifle.
Walnut FX Crown Features
- Ambidextrous thumbhole walnut minelli stock
- Side cocking lever action
- FX Smooth Twist X barrel system
- Interchangeable barrel calibers and barrel liners (additional calibers and liners sold separately)
- Externally adjustable pressure regulator*
- Hammerspring tension power adjuster
- Valve flow adjuster
- Two pressure gauges: one for airtube pressure, one for regulator pressure
- Removable 480cc carbon fiber air cylinder (Additional spare tanks sold separately)
- Max fill pressure is 250 bar (3600 psi)
- Removable high capacity rotary magazine**
- Fully adjustable match trigger
- Dovetail scope rail
- Adjustable Buttpad
- Male quick-disconnect foster fitting
*Note: You need to carefully read the manual and understand how to adjust the regulator before attempting to do so. Decreasing the regulator with pressure in the tank will ruin the regulator. Know what you're doing before attempting to adjust away from the factory settings on the FX Crown.
**Note: FX Impact magazines are NOT compatible, the FX Crown utilizes a model specific magazine.
This item is not eligible for coupon discounts.
Do you want to shoot a gnats ass off at a hundred yards uphill on a cold day with high winds?
Well ya can, and you can get his balls too.
Only problem yâ€™all have is runnin outta room to bury them critter sons a bitches.
I use it for everything even turning the neghbors lights out from 200 yards.
Also circumsized a hillbilly once by shooting his sister in the chin.
No words, Best rifle Ever, I can not compare with other brands! but it is everything, Ted, Matt, Andy, and all reviews on you tube. Is more than that!!!
This is the penultimate air gun. There's really nothing more to say.
If you try it, you WILL buy it.
The JSB 25.4 did right at 900 fps and the wind pushed them around a little at 50 yards. Then I switched to the JSB 34gr King MK-II, these pellets are shooting close to one hole groups at 50 yards and the wind did not seem to bother them at all. I never shot a pellet this heavy before and you could feel a slight recoil when firing the heavy JSB's. I am still getting a feel for this gun but I like what I see so far. The trigger is right at one pound but fully adjustable.
The Heavy JSB heavies are shooting right around 780 fps good for 46 foot pounds. Regulator pressure right out of the box was set at 133 bar. I bumped reg up to 140 bar but have not shot over chrony yet. Gun is definitely shooting hotter than it was before I increased reg pressure. With everything set on Max Power and sighted in at 50 yards with JSB 34's I can reduce hammer tension to 3 on dial and then shoot JSB 25.4's and not touch anything on scope the POI is exactly the same as the 34's. To me this is a really cool feature.From what I see so far FX has a real winner here with the Crown if gun remains reliable and you heed all the do and don't warnings in the owners manual.
I can't wait to buy different cal barrel sleeves and probes, I can see a .22 in the future. I did remove the barrel sleeve and clean, I highly recommend cleaning barrel in any new gun because the first two patches were black so barrel was dirty from whatever FX uses to preserve or manufacture the bore with.
Gun has a lightweight feel, cheekpiece is fully adjustable and I moved up about 1/2" to suite my shooting position. I used High sport match mounts and had to shim bottom half of rear mount because I was close to max on elevation without shim. I ended up ordering a set of Burris Signature 420566 mounts with Posalign inserts to correct this issue for good. Anyone else out there with a Crown please feel free to add comments or thoughts, I will post more data as I shoot Crown
0.177Caliber 0.177 CalVelocity 1000 fpsLoudness 2-Low-MediumMag Capacity 18
0.22Caliber 0.22 CalVelocity 920 fpsLoudness 2-Low-MediumMag Capacity 18
0.25Caliber 0.25 CalVelocity 900 fpsLoudness 2-Low-MediumMag Capacity 16
0.30Caliber 0.30 CalVelocity 870 fpsLoudness 2-Low-MediumMag Capacity 14